breast work / breast appreciation

[Edukator]

Another good use for electrical nylon cable ties and steel hose clamps.
It's time for some shopping at your hardware store...

[hornythumb]

PD did some excellent breasts (s)mashing work.
Here's another nice exemple:

Mash those tits, bomp, bomp, mash those tits ......

Getting close to the limit ?

I wonder what li level of max psi before popping?

[Edukator]

Mash those tits, bomp, bomp, mash those tits ......

Getting close to the limit ?

I wonder what li level of max psi before popping?

More advanced experimentation would be needed but I was told that some mammography machines are going beyond what you can see in the above posted pictures.

Or you can ask PD himself (or his lawyers ?)

[Edukator]

I wonder what li level of max psi before popping?

And since we're into destructive testings, don't forget also evaluating the tensile strenght:

[yyy02]

Three very nice pairs of tied tits, in suspension (?), from the "archives". Uncredited, apologies for the resolution and if it's a revisit of anyone's previous postings.

[Edukator]

Full breasts treatment: caned, then suspended:

[hornythumb]

PI boundtits_3_e1touch_In.jpg


Three very nice pairs of tied tits, in suspension (?), from the "archives". Uncredited, apologies for the resolution and if it's a revisit of anyone's previous postings.

Nice, those puppies are tied off.

[hornythumb]

Full breasts treatment: caned, then suspended:

Good warm-up before the hard stuff starts

[wulf]

PD did some excellent breasts (s)mashing work.
Here's another nice exemple:

Mash those tits, bomp, bomp, mash those tits ......

Getting close to the limit ?

There's only one way to find out...... one half turn at a time.

[wulf]

PI boundtits_3_e1touch_In.jpg


Three very nice pairs of tied tits, in suspension (?), from the "archives". Uncredited, apologies for the resolution and if it's a revisit of anyone's previous postings.

That's a collage of shots from Mallory Knots (aka Piglet) breast hang video.
http://ralphus.net/thegimpforum/downloa ... &mode=view